Smolt feeder S1
S1
Containers from 20 to 1700 liters.
The machine distributes pellets using a feed screw and is made of seawater-resistant aluminum. The S1 can be adapted to most tanks and walkway solutions. Independent tests show that better growth and less fin wear are achieved with pellet distribution across the entire tank. It can be adapted for filling from a rope pull or air filling with the installation of a cyclone.
- Easy adjustment of desired pellet distribution.
- Can use all pellet sizes without adjusting the machine.
- 1.6 or 7.1 rpm on the feed screw.
- Maximum 73 kg distribution per hour.
- Control cabinets can be supplied with a reverse switch and relay to receive signals from external controls (PLC, PC, or similar). 230 or 400 V, 3-phase operation.
The machine distributes pellets using a feed screw and is made of seawater-resistant aluminum. The S1 can be adapted to most tanks and walkway solutions. Independent tests show that better growth and less fin wear are achieved with pellet distribution across the entire tank. It can be adapted for filling from a rope pull or air filling with the installation of a cyclone.
- Easy adjustment of desired pellet distribution.
- Can use all pellet sizes without adjusting the machine.
- 1.6 or 7.1 rpm on the feed screw.
- Maximum 73 kg distribution per hour.
- Control cabinets can be supplied with a reverse switch and relay to receive signals from external controls (PLC, PC, or similar). 230 or 400 V, 3-phase operation.
